On-line high-speed Glue Sprayer with its unique advantages of flexible glue, accurate glue, quality assurance, gradually replace the traditional box / box gluing process. The application is suitable for bottom filling, red glue, chip encapsulation, Dam & AMP; fill, surface mounting, precision coating, semiconductor chip encapsulation and so on.
Product Features
1, cabinet-type visual dispensing system with overseas imports of precision injection valve, is a dedicated to point solder paste machine equipment.
2. The application of high precision injection valve can achieve the minimum diameter of 0.4 mm, the minimum linear diameter of 0.5 mm, the maximum viscosity of 100,000 MPAS, the precision can reach 98% (the value that can not be achieved by common dispensing valve injection valve) .
3. With CCD vision system, high precision vision positioning automatic recognition, no need for precision fixture.
4. No surface contact point solder paste, more efficient, can be used for solder paste bonding / Welding / bottom filling / spot filling / surface mount bonding / test paper spraying / Stack packaging POP, etc. .
5, support a variety of solder paste applications, suitable for semiconductor, SMT solder paste, such as FPC board, precision components, capacitance IC welding filler.
Product parameters | ||
| Product | On-line high-speed Glue Sprayer | |
| Model number | GB-50PLC-2 | |
| Contour dimension（W*D*H) | 770*1200*1400mm | |
| Dispensing area（W*D) | 500*500mm | |
| Computer | Windows 7 system based on C under the development of software | |
| Programming mode | Mouse key sleeve | |
| Obliquable angle | Rubber Valve can not be inclined (Optional Rubber Valve inclined 35) inclined angle using linear cylinder (optional) | |
| Actuated | Servo motor ball screw | |
| Positioning Accuracy (high speed) | ±0.01m | |
| Repeatability (high speed status) | ±0.01m | |
| Maximum speed of movement | 1000mm/s（X，Y，Z） | |
| Maximum acceleration | 1g（X，Y） | |
Transport drive | Stepper motor, stainless steel chain | |
| Width modulation system | Manual (Optional Automatic) | |
| Amplitude modulation speed | 250mm/min | |
| Transport speed | 0-2400mm/min | |
| Direction of transmission | L→R（R--L） | |
| Maximum thickness of substrate | 8mm | |
| Bearing capacity of track (including fixture) | 5.8kg | |
| Orbital altitude | 880-930mm | |
| Number of orbits | 1(OPTIONAL 2) | |
| Dispensing Area W L | 460×460mm | |
| Visual positioning system | INDUSTRIAL CCD | |
| Maximum Height of element | 100 down, 100 mm | |
| Number of rubber valves | 2 | |
| Type of rubber valve | Needle type Glue Valve, Cone Type Glue Spray Valve, Fan Type Valve, Film Glue Spray Valve (Optional) | |
| Single coat width | 2-30mm | |
| Paint capacity | 10L | |
| Exhaust mode | Exhaust air from Rear Hole | |
| Exhaust Air Requirement | 15m³/min | |
| Communication interface | SMEMA interface | |
| Factory requirements | Voltage 220V, 50-60HZ, current 10A, minimum air pressure 0.65 MPA | |
| Typical application | Bottom fill, red glue, chip package, Dan & FILL, surface mount, precision coating, semiconductor chip package, etc. | |
Standard Configuration 1, vacuum cleaning device 2, non-contact injection valve 3315JET 3,10cc, 30cc, 500cc feeding device 4, sound and light alarm device 5, Jet Pressure Stabilizer 6, Jet Pressure Stabilizer 7, Monorail 8, XYZ Axis Reference Point calibration platform 9, Standard Operating Software. Optional 1, low level detection and alarm 2, weighing system 3, CCD vision system 4, automatic loading and unloading device 5, preheating and dispensing heating area 6, Double Track 7, laser altimeter 8, runner Heater 9, component edge recognition function 10,200 / 300cc feeding device 11, vacuum adsorption platform | |
HotProduct：
ProductType
Recommendations
- Gt-automatic Visual Glue Dispenser ..
- On-line high-speed Glue Sprayer..
- The workshop of Wisdom..
- Linear light source..
- Mask machine..
- Curing equipment..
Contact
email:sales@gounbot.com
tel:0512-6826 6666
address:No. 2, Shuangma Road, Suzhou Industrial Park, Jiangsu Province
